Over lubricating your chain, on the other hand, is also bad for your chain and will annoy your bike mechanic. Excess lube attracts dirt and dust and creates gross buildup on your drivetrain. This can actually wear out your drivetrain faster than a dry chain! To properly lube a chain you only need a couple supplies.
Should I wipe off excess chain lube?
In fact too much oil attracts more dirt to stick to the chain and wear increases. Therefore after lubing excess oil needs to be removed. To do this wait for 5 minutes after oiling the chain, turn the drivetrain over a few times then use a dry rag to wipe off any excess.
How often should I lube my bike chain?
Bicycle Tutor recommends cleaning and lubricating your bike’s drive chain at least once every month to maintain optimal performance and protection. The chain and drivetrain are typically the dirtiest parts of your bike, and this dirt is bad news for bike longevity and performance.
How do you remove excess lubricant from a bike chain?
Brush out the links with a firm brush (an old toothbrush also works). Relubricate the links from time to time with a chain lubricant. Wipe off excess lubricant with a clean, dry rag. Over-lubricating can actually attract new dirt.
How do I know if my bike chain needs lube?
Over-lubing can also be detrimental, as excess lube attracts dirt, forming a gritty paste which grinds down chain components and other drivetrain bits. Appearance, time, or distance are not as reliable as sound (grinding, creaking, squeaking, squealing) as an indicator for when a chain needs to be lubed.
How long does chain lube take to dry?
This set up time is also especially important for Ice Wax 2.0 which also needs time to dry. Ideally, you would lubricate your chain at least an hour before riding, but even 15-30 minutes will help the lubricant set up and last longer.
Is WD40 bad for bike chains?
Can I use WD-40 to lube my bicycle chain? No. You should never use WD40 as chain lubricant since WD-40 is NOT a true lubricant since it’s primary use is as a solvent or rust dissolver.
Is it bad to hose down your bike?
So, can you use a hose on your bike? YES! It is true that if you leave water sitting on your bike for a long time, leave soap or degreaser on your bike, or do not properly dry off your bike before storing it, you could have some rust and wear issues on your hands.
How often do you degrease your chain?
If you feel like your bike needs a thorough cleaning, you can get help from your local bike shop, especially if your bike is made by one of the top manufacturers. You should make a point that after every 100 to 150 km, clean, degrease and re-lube your bike chain.
Can I use engine oil as chain lube?
Usage of engine oil or grease is not at all recommended over a proper chain lubricant. Grease wont penetrate into the O rings and X rings as compared to chain lubricant. Whereas engine oil lasts only for a few days which reduces the life of your chain and sprocket.