# Is my bike chain too long?

Contents

Do a simple check on your bike by shifting the chain to the big chainring and the biggest cassette cog; then, push on the end of the derailleur cage (pushing forward) to see how much it will move forward. If it moves just a little, then you’re good. If it moves a lot, then you’ve got too much chain.

## How do I know if my chain is too long?

If the chain is really short, then you might not even be able to shift into the largest cog. Then, if you shift into the smallest chainring and smallest cog and if the rear derailleur pulls the chain back so far that it comes in contact with itself, the chain is too long.

## Do I need to shorten my bike chain?

Unless of course you’re running singlespeed, then yes, you need to shorten the chain. Strictly, and assuming the chain was the correct size, yes. No. Reducing the chainring size by two teeth means the chain needs to be one tooth shorter, so half a full link.

IT IS INTERESTING:  What components do you need to build a road bike?

## Is my bike chain too slack?

To find out whether your chain is too long take a look at it from the side with your eyes being level with the chain. A loose chain will sag close to or below the chainstays as the chain hangs between the rear cogs and chainring. The chain might skip as you pedal, or even drop off the gears.

## How do I know what size chain I need for my bike?

Add the multiplied chainstay length, the divided number of teeth for the chainring and rear sprocket, and add 1 (or 2.5 cm). The result is the ideal chain length for your bike. For example, you’d add 32.5, 13, 7 and 1 to get 53.5. The length of the chain should be 53.5 inches or 135.89 cm.

## How many links should my chain have?

Bicycle drive chain length

A new bicycle chain usually comes with 116 links. This is long enough for the biggest chainrings and for most distances of rear wheel from front chainrings. So for optimal length a new chain is usually shortened from the 116 links that come in the box.

## Is it OK to shorten a chain?

Chains will also “stretch” over time, but do not shorten the chain to address this issue. Stretching is a sign of wear, and once your chain exceeds the recommended maximum on a chain stretch gauge, it needs a full replacement.

## What happens if chain is too long?

A chain that’s too long (loose) may cause dropped chains and/or inconsistent shifting — front and back shifting. … BUT, things can go really bad … if it does shift and rips the derailleur off, damages the chain or bends gear teeth. Too long – can cause annoyance. Too short – can be very expensive.

## How long should my chain be?

After a measurement is obtained, its a good idea to opt for a necklace size that is at least the second size up from your neck size. For example, if you have an 18 inch neck, you should probably choose a chain length of 20 inches or more. An 18 inch chain would feel too tight.

## How tight should a chain be on a bike?

It should be tight enough that it only allows you to move it up and down about one inch. If it is sagging or much looser than that, you need to tighten that chain up. Chains often loosen when a bike does not have a derailleur.

## How much tension should a bike chain have?

Chain Tension

There should be approximately one half inch of movement in the chain up and down at a point half way between the front and rear sprockets. To change the tension loosen one of the axle-nuts and move the wheel forward or backward slightly and snug it up again.

## How do you calculate chain length?

L = 2 (C) + (F/4 + R/4 + 1) L = Length – your chain length in inches (rounded to the nearest inch). C = Chain stay – the distance between the middle of the crank to the rear axle. Measure to the closest ⅛ and convert this to decimal form.

## What size is standard bicycle chain?

The chain in use on modern bicycles has a 1⁄2 inch (12.7 mm) pitch, which is the distance from one pin center to another, ANSI standard #40, where the 4 in “#40” indicates the pitch of the chain in eighths of an inch; and is standard 606 (metric) #8, where the 8 indicates the pitch in sixteenths of an inch.

IT IS INTERESTING:  How fast does a good cyclist ride?