Question: How often should I service my mountain bike forks?

How often should you service a MTB fork?

Some forks require servicing every 20 hours. *EVERY 30 HOURS OF RIDING: Your fork should be disassembled, inspected, cleaned and re-grease. If the fork appears to be relatively clean, you can go 40 hours between servicing. If the fork appears excessively dirty you should service it every 20 hours.

How often should I service my front fork?

Fox recommends that the minimum suspension fork and shock service is 125 hours of use, yearly, or whichever comes first. That is certainly on the longer side of things. Similar to changing the oil in your car, the more frequently you service your suspension, the better the fork will perform for longer.

How do I know if my forks need servicing?

Some indicators for basic bath oil/seal service = leaking around seals, excessive oily dirt goo build up on top of seals that reappears on every ride, visible wear on stanchions(by that time it’s too late).

How much does it cost to service a MTB fork?

For full service on the fork, about $100; this includes a basic inspection, an oil replacement, foam ring and dust wiper replacement (as necessary), seal and air spring inspection, damper rebuilding or replacement, and cleaning other parts.

IT IS INTERESTING:  Quick Answer: How long do batteries last on electric bikes?

How long do mountain bike forks last?

How Long Do Mountain Bike Shocks Last? You should expect the bike shocks to at least last 5 years of moderate use or 3+ years of heavy use. With regular maintenance and serving.

When should I service my bike fork?

Forks need regular periodic maintenance. We recommend cleaning and lubrication refills (lower leg service) every 25 riding hours, and a full service (strip down, seal replacement and full oil change) every 200 hours. The more frequent lower leg service can be carried out at home, by the experience home mechanic.

Can you change fork oil without removing forks?

You will need to remove the caps to refill the fork tubes with oil. … If they do, you are in luck and will be able to change the oil without removing the fork legs. Put old newspapers on the floor under the front end. Place a drain pan under the fork legs and remove the drain plugs, one side at a time.

What happens if forks run out of oil?

With low or no oil in one of your fork tubes, the spring on just one side may absorb next to nothing. On the other hand, your bike might absorb too much. … Your bike needs shock absorption to recover from bumps and jump landings to prevent damage.

How do you lubricate a bike fork?

Apply Your Lube

To start with, you’ll want to apply Forkboost to the base of your fork stanchions. The best way to do that is to drip it directly onto the stanchion just above the dust seals on your fork. If you’re using it on a rear shock, flip the bike upside down and apply lube just above the dust seal.

IT IS INTERESTING:  Why is my bike pulling to the left?

How do I add oil to my mountain bike forks?

Do: Apply fork oil, RedRum, or Teflon-based lubrication to the upper tube area nearest to the dust seals. Cycle the fork a few times to circulate the lubricant. You can even gently pinch the dust seal, nearest to the upper tube, and add some lubrication (mentioned above) to the inside of the dust seal.