You asked: How do I know if forks will fit my bike?

The main thing you need to look for is the steerer size. Most Mtb headtube is 1.1/8″, a few are 1.5″ or the combo of the two, tapered steerer. So as long as the fork is 1.1/8″ you are good to go.

Can you put a suspension fork on any bike?

short answer is yes you should be able put a suspension fork on the frame, though you may come into a couple problems.

How do you measure bike forks?

The length of a fork is measured from the center of the axle to the base of the crown race seat, where the fork and headset meet. This measurement can vary by a few millimeters across different brands. A fork of a longer length will decrease the head tube angle, and a fork of a shorter length will increase it.

Can you put a 27.5 fork on 26 bike?

Condensed answer: A 26-inch wheel can be easily installed on a 27.5 fork if both are disc brake ready. If the fork uses rim brakes, however, the braze-ons would be a bit higher, and the calipers won’t catch the rim.

IT IS INTERESTING:  Who makes Iron Horse mountain bikes?

Can you put a mountain bike fork on a road bike?

Short answer is MTB forks probably won’t fit. Most MTB’s use 26″ wheels, which is smaller than 700c road wheels, and the holes for brakes will be different. Having said that, some hybrids have front shocks, so it wouldn’t be impossible to sort. Have you ridden a road bike any distance?

How do I know what size forks to buy?

The traditional standard has long been 1 1/8” but some modern bikes feature larger 1.5” head tubes or even tapered versions, where the diameter of the tube at the bottom (1.5”) is larger than at the top (1 1/8”) , so you’ll need a fork with a tapered steerer tube to match.

What size MTB Forks do I need?

The main thing you need to look for is the steerer size. Most Mtb headtube is 1.1/8″, a few are 1.5″ or the combo of the two, tapered steerer. So as long as the fork is 1.1/8″ you are good to go.

How do you measure front shocks on a bike?

Measuring stroke length

For coil shocks: Remove the spring and measure from where the shaft goes into the shock body to where the eye starts on the shaft. For air shocks: In many cases, it’s possible to get an accurate stroke measurement by simply measuring from the lip of the wiper seal to the end of the air shaft.

Can I use a 700c fork on 26 frame?

Works fine, the rear hub spacing is only 5mm difference and the fronts are the same. I’ve got a set of 700c rims mounted to some CK disc hubs and they fit fine on a 26″ IF. Larger tyres (38s) do have clearance issues on some frames.

IT IS INTERESTING:  Do cyclists need to stop at stop signs?

What size tire do I need for 26 inch rims?

26 inch is your rim (wheel) diameter. Usually any 26″ tire will fit your wheel up to a width point depending on fork width/height. Tire widths run from skinnier 1.5 to wide 2.3 and wider. If you are doing street riding then go skinny.

Can you put 650b wheels on 26?

A number of 26-inch forks can fit a 650b wheel, though you’ll need to add rubber bumpers to prevent your fork kissing your front tire, and you may need to limit the rear suspension in a similar fashion.