You asked: How do you explain bike gears?

How do you explain bike gears to a child?

Explain again which way the gears go. Low gear, low number = faster legs, lower effort, up hills. High gear, higher number = harder on the legs, more effort, downhill. N’s gears also have an up and down symbol so you can explain that as well if your child’s bike has that.

What gears for what speed on bike?

While the rider should change the gears more in instincts and the ideal speed varies depending on the situation, the approximate speed range are like this: 0 to 15 km/h for first gear, 15 to 30 km/h for second gear, 30 to 40 km/h for third, 40 to 55 km/h for fourth, and 55 km/h and higher for fifth and sixth gears.

What are the 7 gears on a bike for?

On a 7-speed bike, the lower gears make it easier to pedal and the higher gears allow for better movement going downhill. Compared to a 3-speed bike, a 7-speed is preferable for a rider who travels on varying terrain.

IT IS INTERESTING:  How do bicycles reduce friction?

How do you use gears on a bike for beginners?

Get to grips with shifting your bike gears with these super quick beginner tips.

  1. Practice Makes Perfect. …
  2. Right = Rear, Left = Front. …
  3. Don’t cross the chain! …
  4. Anticipate the hill. …
  5. Left = big changes, Right = fine tuning. …
  6. Don’t shift too quickly.

How do you ride a bike with gears?

Practice the following:

  1. Squeeze the clutch lever in, then slowly ease it out.
  2. Roll the throttle towards the back of the motorcycle (“roll on”) to go faster.
  3. Roll the throttle towards the front of the motorcycle (“roll off”) to go slower.
  4. Press down on the gear shift to put the motorcycle into first gear.

What gear should I use on a flat road?

When riding on flat terrain, it’s best to use the middle or big front chainring and a range of rear cogs. You also want to avoid cross-chaining, where the chain is at an extreme slant either in the big ring up front and the biggest cog in back, or the small ring up front and the small cog in back.

What gear should I ride on a flat?

Middle gear is perfect for regular terrain on flat roads. When you need some strength but not too much to ride on undulating terrain, you can shift your gear to the middle level. For that, you have to combine middle chainring on triple rear cogs to ride on flat roads smoothly.

What gear should you be in going uphill on a bike?

Low Gear = Easy = Good for Climbing: The “low” gear on your bike is the smallest chain ring in the front and the largest cog on your cassette (rear gears). In this position, the pedaling will be the easiest and you’ll be able to pedal uphill with the smallest amount of resistance.

IT IS INTERESTING:  Quick Answer: Where can I ride my dirt bike in Southern California?

How many gears does a bike need?

How many gears do you need on a bike? Technically, you only need one speed. Hence, the single-speed bike. Don’t assume that just because a bike only has one speed that it can’t get you where you need to go.

What gear ratio is best for climbing?

A common setup on a road bike adapted for climbing is a compact road crankset with 50-34 chainrings and an 11-32 cassette, which gives a lowest gear of 34:32 or a ratio of 1.06:1.

What does a 9 speed bike mean?

When magazines and websites talk about a bike’s ‘speed’, it’s a reference to the number of sprockets. A bike with three chainrings and nine sprockets is 9-speed, even though it has 27 theoretical ratios. The higher the sprocket count, the more expensive, smoother shifting, and lighter weight the gears.

Do you shift gears while pedaling?

Rule 1. You must be pedaling when you change gears. … If you click the shifters without pedaling, the gears won’t change until you do start pedaling, and when you do, you’ll hear some very disconcerting noises. You also don’t want to shift the gears while standing still.