Can I put 20W50 in my motorcycle?

the 20w50 is perfect for summer riding because it protects a bit better in the high temps. as long as its motorcycle specific you can pretty much run any weight oil.

Can I put 20W50 oil in my motorcycle?

Suitable Vehicles. Depending on the recommendations for the particular vehicle, 20W50 oil is suitable for large or small diesel engines, gasoline engines, motorcycles and aviation vehicles. It is also suitable for both air- and liquid-cooled engines.

Can you bike with 20W-50?

1-48 of 540 results for “20W50 Engine Oil”

This synthetic engine oil is compatible with all major two-wheeler brands in India. It is designed to reduce friction and give your bike more power. This synthetic engine oil is compatible with all major two-wheeler brands in India.

Will 20W50 hurt my engine?

20W-50 is not a very popular oil viscosity. In the wrong engine, it can lead to sludge, excess friction, varnish deposits, problems with oil burning and oil pressure, and even affect your engine life. … 20W-50 oil does not have a reliable low temperature viscosity grade.

IT IS INTERESTING:  Are turn signals required on motorcycles in Arizona?

Can I use 20W50 instead of 10w30 in motorcycle?

You can use it if the engine has a lot of miles on it and is showing signs of wear. It might slow the consumption down a bit, but one of the side effects of using thicker oil is it will burn more fuel. If the engine is fairly new, using 20W50 can cause other problems.

Is 20W-50 too thick?

Even in hot climates use the recommended oil, using an oil that is too thick can starve bearings of oil, cars of today have much tighter tolerances so need thinner oils, 20w/50 is far too thick to use in an engine designed to use 5w/30.

What happens if I use 20w50 instead of 10W40?

The smaller number, (the 20 part of 20w-50) describes how the oil behaves at 40 deg C and a 20w at 40 deg C is about 10 times thicker than your engine wants. A 10w-40 is better at around 6 times thicker and a 0w-40 is much better at about 4 times thicker.

Can I use 20w50 instead of 20W40?

20W40 is suitable for hotter climates and will not cause sludge as opposed to 20w50 which is more appropriate for hotter conditions. But, it has more drawbacks than 20w40. For example, it will only pass two or three cold starts in a colder climate but nothing beyond that.

Can I use 20w50 instead of 10w50?

Yeahh, you can use it. In 10w50, 10 is the viscosity of oil at low temperature and 50 is viscosity of oil at operating temp. (when the engine is running). 10w50 is thinner than 20w50 at low temp.

IT IS INTERESTING:  Frequent question: How do you get scuff marks off a motorcycle helmet?

What happens if I use 20w50 instead of 10w30?

The main reason for using 20w50 is to slow down oil burning. If this is the case, using 10w30 would speed up the burning. I have had oil burners before, and used 20w50 in the summer, with no problem. But, your car will be hard to start in very cold weather with 20w50.

Which oil is thicker when hot?

The viscosity of hot oil is measured using different test parameters than when the oil is cold, so the numbers after the “W” don’t relate to the numbers in front of the “W”. The difference between 10W-30 and a 10W-40 is the high temperature viscosity. Obviously, a 10W-40 is thicker than a 10W-30 at high temperature.

What grade is thick engine oil?

Oil grades relate to an oil product’s performance at operating temperature (about 212 degrees Fahrenheit in your engine). You might be familiar with terms such as “30-weight” or “10W-30” oil. Those numbers refer to the grade. The higher the number, the thicker the oil.

Can too thick oil damage engine?

If the oil is too thick (aka, the viscosity is high), your car may not start in cold temperatures (cold weather places more strain on a vehicle in any case). When this happens, the thick liquid can’t properly lubricate every part, and it creates enough resistance to impair the most important function–ignition.

Which oil is best for bike engine?

Best Engine Oil for Bikes Reviews

Engine Oil Best For Engoil Oil Type
1.) Motul 7100 4T 20W 4-stroke bike fully synthetic
2.) Shell Advance ultra 100cc bikes versatile (can be used in every type)
3.) Shell Rotella T6 5W-40 from 100cc to 200cc fully synthetic
4.) Motul 3100 4T Gold from 100cc to 200cc semi-synthetic
IT IS INTERESTING:  How can I improve my motorcycle gas mileage?

Which is better 15w50 or 20W50?

Yes,it would not make much difference. Important thing is to get the last digit,ie 50 correct. First digits are an indication of normal temperature viscosity or in layman terms how easy it would be to start the engine. But like I said it would be fine to interchange 20w50 with 15w50.

What is 5W 50 oil used for?

A 5W-50 motor oil is suited for a broad range of applications including motorsport, classic/collector cars and extreme driving conditions like towing and high operating temperatures.