Can I use 20W50 oil in my motorcycle?

Based on what I’ve read, the thicker oil (20w50) is generally not recommended for higher revving bikes like the R1, particularly the Amsoil which supposedly is better suited for V-twins & Harleys (low RPMs, air-cooled & longer oil change intervals) & can adversely impact horsepower / gas mileage.

Can I put 20W50 oil in my motorcycle?

Suitable Vehicles. Depending on the recommendations for the particular vehicle, 20W50 oil is suitable for large or small diesel engines, gasoline engines, motorcycles and aviation vehicles. It is also suitable for both air- and liquid-cooled engines.

Will 20W50 hurt my engine?

20W-50 is not a very popular oil viscosity. In the wrong engine, it can lead to sludge, excess friction, varnish deposits, problems with oil burning and oil pressure, and even affect your engine life. … 20W-50 oil does not have a reliable low temperature viscosity grade.

Can I use 20W50 instead of 10w30 in motorcycle?

You can use it if the engine has a lot of miles on it and is showing signs of wear. It might slow the consumption down a bit, but one of the side effects of using thicker oil is it will burn more fuel. If the engine is fairly new, using 20W50 can cause other problems.

IT IS INTERESTING:  How do you pimp a motorcycle?

What happens if I put 20W50 instead of 10W40?

The smaller number, (the 20 part of 20w-50) describes how the oil behaves at 40 deg C and a 20w at 40 deg C is about 10 times thicker than your engine wants. A 10w-40 is better at around 6 times thicker and a 0w-40 is much better at about 4 times thicker.

Is 20W-50 too thick?

Even in hot climates use the recommended oil, using an oil that is too thick can starve bearings of oil, cars of today have much tighter tolerances so need thinner oils, 20w/50 is far too thick to use in an engine designed to use 5w/30.

What is 20W-50 oil used for?

A SAE 20W-50 motor oil is typically used in older vehicles or in particularly warm climates. Castrol GTX 20W-50 has been specially formulated to help extend the life of your engine by keeping it free from sludge, even when operating in extremely high temperatures.

What grade is thick engine oil?

Oil grades relate to an oil product’s performance at operating temperature (about 212 degrees Fahrenheit in your engine). You might be familiar with terms such as “30-weight” or “10W-30” oil. Those numbers refer to the grade. The higher the number, the thicker the oil.

Can too thick oil damage engine?

If the oil is too thick (aka, the viscosity is high), your car may not start in cold temperatures (cold weather places more strain on a vehicle in any case). When this happens, the thick liquid can’t properly lubricate every part, and it creates enough resistance to impair the most important function–ignition.

IT IS INTERESTING:  Frequent question: What size motorcycle engine requires a license?

Can I use 20w50 instead of 10w50?

Yeahh, you can use it. In 10w50, 10 is the viscosity of oil at low temperature and 50 is viscosity of oil at operating temp. (when the engine is running). 10w50 is thinner than 20w50 at low temp.

What happens if I use 20w50 instead of 10w30?

The main reason for using 20w50 is to slow down oil burning. If this is the case, using 10w30 would speed up the burning. I have had oil burners before, and used 20w50 in the summer, with no problem. But, your car will be hard to start in very cold weather with 20w50.

Which oil is best for bike engine?

Best Engine Oil for Bikes Reviews

Engine Oil Best For Engoil Oil Type
1.) Motul 7100 4T 20W 4-stroke bike fully synthetic
2.) Shell Advance ultra 100cc bikes versatile (can be used in every type)
3.) Shell Rotella T6 5W-40 from 100cc to 200cc fully synthetic
4.) Motul 3100 4T Gold from 100cc to 200cc semi-synthetic

Which is better 15w50 or 20w50?

Yes,it would not make much difference. Important thing is to get the last digit,ie 50 correct. First digits are an indication of normal temperature viscosity or in layman terms how easy it would be to start the engine. But like I said it would be fine to interchange 20w50 with 15w50.

What is the difference between 10W 40 and 20W 50 motorcycle oil?

Now to answer your question a bit more simply, 10W40 is thinner than 20W50, both hot and cold. If both were 10W, then they would be the same cold, with the 40 being thinner than 50 when hot.

IT IS INTERESTING:  Question: How do you take a motorcycle off a trailer?

What oil is the thickest?

60 is the thickest oil in general use, but there are racing grades that go to 70. Most lubricating oils are now multigrade. There are now some additions to the table for very low viscosity, and these go in increments of 4 (4, 8, 12, 16) to distinguish from the 5 increment Winter grades.

Can you use car engine oil in a motorcycle?

Though it is okay to temporarily use car engine oil in a motorcycle, it’s not okay to consistently use it. As I mentioned before, there are some differences between the two oils and due to those differences, a motorcycle will start lacking some vital components it needs from the oil and will start breaking down.