Frequent question: How much does a new motorcycle chain cost?

How much does it cost to replace a motorcycle chain?

How much does a bike chain cost to replace? Entry level chains can start off around $15.00 with more expensive and higher performance chains ranging from $25.00 to $60.00 or more. More expensive chains increase shift quality and are generally more durable as they wear.

How much should I spend on a motorcycle chain?

If you need a bike chain for a relatively inexpensive bike the cost of a decent chain will run you about $16 – $40 dollars. For a nice road bike, on the other hand, the chain cost can range from $30 – $100 dollars. Some people place a lot of value on the quality chain that they need if they are into bike racing.

What is the life of a motorcycle chain?

But chains wear out over time and need replacing. So, how often should a motorcycle chain be replaced? In general, a properly maintained motorcycle can last 20,000 to 30,000 miles, sometimes more. But, some last as little as 5,000 to 10,000 miles.

IT IS INTERESTING:  How old does a motorcycle have to be to be a classic NZ?

How long should bike chain last?

Most mechanics agree that you should replace your chain about every 2,000 to 3,000 miles, depending on your riding style. Many Tour De France riders wear out two or even three chains on their primary bike over the course of the three-week race.

Are bike chains worth it?

You could save up to 30 watts of power! By regularly cleaning your bike chains on rotation, you will save on wear and tear of your rear cassette and chainrings. This system extends the life of your drive chain, saves you money and, most importantly of all, improves the efficiency of your ride.

Are expensive bike chains worth it?

No. The only advantage of expensive chains within a specific brand is the minor reduction in weight. The ones with extra plating do look nicer and provide some corrosion resistance, but it takes almost no effort to keep your chain rust free.

How do I know if my chain is bad?

Another, much easier way to check for a worn chain is to try to pull the chain away from the rear of the sprocket on the rear wheel. If the chain is worn, you’ll reveal about half a tooth of the sprocket. A new chain will wrap around the sprocket snugly and won’t pull away.

What causes a motorcycle chain to break?

When a link is rusted enough, it becomes weak and can potentially break. The other big reason a motorcycle chain breaks is because of the wrong tension. If the chain is too loose, it can come out of alignment with the sprockets which will likely cause a jam.

IT IS INTERESTING:  Can I use car motor oil in my motorcycle?

How often do you need to change a motorcycle chain?

Depending on your bike your chain may require adjustments frequently or rarely, it really all depends. It’s common to have chains require more and more frequent adjustments as they become worn out, so if your chain has more than 10 or 15,000 miles on it you might want to start watching for signs of stretching.

How often should a motorcycle chain be lubed?

A motorcycle chain should be lubricated every 300-600 miles to ensure peak performance and a long life. Lubricate the chain after riding, not before. This allows time for the solvents in the spray to evaporate before the bike is used again, and lets the lubricant penetrate the link properly.

Can you put a new chain on old sprockets?

Normally, chains and sprockets should be changed at the same time. To not do so may cause accelerated wear on both the new chain and the old sprockets. If your old chain had stretched enough to need changing, you can bet the sprockets are worn, as well.

How many miles can you put on a motorcycle chain?

Don’t clean and lube your chain, replace it more often. It depends on how much rain/sand/grit you ride through in addition to your efficacy and frequency of chain cleaning. I often got 10,000 to 15,000 on a liter bike chain. I often got 20,000 to 25,000 on a VStrom 650 chain with a chain oiler.