How long does a drive belt last on a motorcycle?

But even veteran enthusiasts can make the mistake of forgetting to look after their bike’s drive belt, which is strong, stretch-resistant and made from tensile cords. Because a drive belt can last up to 100,000 miles before needing replacement, riders may lose track of this important part of motorcycle maintenance.

How often should you change a motorcycle belt?

Bottom line: as long as the bike gets ridden every once in a while and has modern belts on it, you can safely go three years between belt changes if you don’t manage to put 12,000 miles on it first.

How often should you change your drive belt?

A good rule of thumb is to replace your V-Belt every 30,000 miles, while your serpentine belt and timing belt should be replaced every 50,000, although these numbers vary depending on the make and model of your car. Hoses should typically be replaced every four years.

How often should you change a drive belt on a Harley Davidson?

The maintenance schedule for all Harley motorcycle models calls for a drive belt inspection and tension check after the first 1,000 miles and every 5,000 miles thereafter, the same interval as an oil-and-filter change.

IT IS INTERESTING:  How often should you replace chain on motorcycle?

How do I know if my drive belt is bad?

If your serpentine belt is failing, you may notice performance issues with your vehicle. The vehicle may frequently overheat. Your air conditioning or power steering may fail to work or not work properly. You may notice your vehicle battery failing to recharge if the alternator is affected by a bad serpentine belt.

How do I know if my drive belt needs to be replaced?

Common Signs of Drive Belt Replacement

  1. Strange Noises. One of the biggest signs that you probably need to take your vehicle to the dealership for a check is when you start hearing strange noises coming from your engine. …
  2. Visual Signs of Wear. …
  3. Mileage Indicators. …
  4. Breakage is Bad.

How much does it cost to replace a drive belt?

Once the belt starts to wear thin or breaks, it will need replacing, if those parts are going to work as they should. You will pay between $120 and $160 for this replacement job. The labor should cost about $80, while parts will run you about $60.

How many miles does a motorcycle chain last?

Don’t clean and lube your chain, replace it more often. It depends on how much rain/sand/grit you ride through in addition to your efficacy and frequency of chain cleaning. I often got 10,000 to 15,000 on a liter bike chain. I often got 20,000 to 25,000 on a VStrom 650 chain with a chain oiler.

Is chain driven better than belt driven?

It is evident that the two drives function the same way, but a chain drive is more durable than a belt drive. Unlike belt drives, chain drives can lift and move more massive doors, which is why many prefer it. Chain drives are best for steel carriages and not suitable for less heavy door models.

IT IS INTERESTING:  What is the safest helmet for motorcycles?

Which is better shaft drive or belt drive?

When it comes to safety, a shaft drive is the best bet. There’s less chance of getting hurt by a belt or chain whizzing around and much less chance of breakage. While chains can handle much more power when they break, they can damage your bike or your leg. A broken belt will leave you stuck but not injured.

How long does a Harley-Davidson last?

Harley-Davidson motorcycles can last for well over 75,000 miles if well-maintained and ridden responsibly and there are many Harleys on the road with over 100,000 miles on them. Based on an annual mileage of 4,000 miles, one can infer that a Harley Davidson can last for more than 25 years.

How long does it take to change a Harley belt?

Harley drive belts are very strong and durable and only need replacement after thousands of miles of riding. Unless you have a warranty, a replacement will cost a few hundred dollars at your Harley dealer. Do it yourself in about 30 minutes, for less than $50.

When did Harley-Davidson switch to belt drive?

From 1992, rubber tooth-belt drive was adopted for all Harley-Davidson streetbikes.