Question: How long do motorcycle drive belts last?

But even veteran enthusiasts can make the mistake of forgetting to look after their bike’s drive belt, which is strong, stretch-resistant and made from tensile cords. Because a drive belt can last up to 100,000 miles before needing replacement, riders may lose track of this important part of motorcycle maintenance.

How often should you change a motorcycle belt?

Bottom line: as long as the bike gets ridden every once in a while and has modern belts on it, you can safely go three years between belt changes if you don’t manage to put 12,000 miles on it first.

How often should you change a drive belt on a Harley Davidson?

The maintenance schedule for all Harley motorcycle models calls for a drive belt inspection and tension check after the first 1,000 miles and every 5,000 miles thereafter, the same interval as an oil-and-filter change.

How often should you change your drive belt?

A good rule of thumb is to replace your V-Belt every 30,000 miles, while your serpentine belt and timing belt should be replaced every 50,000, although these numbers vary depending on the make and model of your car. Hoses should typically be replaced every four years.

IT IS INTERESTING:  Do u need insurance for a motorcycle?

How long does a Harley-Davidson last?

Harley-Davidson motorcycles can last for well over 75,000 miles if well-maintained and ridden responsibly and there are many Harleys on the road with over 100,000 miles on them. Based on an annual mileage of 4,000 miles, one can infer that a Harley Davidson can last for more than 25 years.

When did Harley-Davidson switch to belt drive?

From 1992, rubber tooth-belt drive was adopted for all Harley-Davidson streetbikes.

How long does it take to change a Harley belt?

Harley drive belts are very strong and durable and only need replacement after thousands of miles of riding. Unless you have a warranty, a replacement will cost a few hundred dollars at your Harley dealer. Do it yourself in about 30 minutes, for less than $50.

What are Harley drive belts made of?

Drive belts are now made from rubber and carbon fiber. Both these materials are extremely durable and low-maintenance. You don’t need to make frequent adjustments or put in lubrication when you have this part. Newer drive belts are also cleaner and quieter than chain drives.

Who makes Harley belts?

The Denver belt designer and the Milwaukee motorcycle manufacturer are still partners today. Gates Poly Chain is used on 21 street and touring motorcycles produced by Harley-Davidson. The belt is also designed into the final drive of several models produced by Buell, a Harley-Davidson company.

How do I know if my drive belt is bad?

If your serpentine belt is failing, you may notice performance issues with your vehicle. The vehicle may frequently overheat. Your air conditioning or power steering may fail to work or not work properly. You may notice your vehicle battery failing to recharge if the alternator is affected by a bad serpentine belt.

IT IS INTERESTING:  How do you carry a passenger on a motorcycle?

How do I know if my drive belt needs to be replaced?

Common Signs of Drive Belt Replacement

  1. Strange Noises. One of the biggest signs that you probably need to take your vehicle to the dealership for a check is when you start hearing strange noises coming from your engine. …
  2. Visual Signs of Wear. …
  3. Mileage Indicators. …
  4. Breakage is Bad.

How much does it cost to replace a drive belt?

Once the belt starts to wear thin or breaks, it will need replacing, if those parts are going to work as they should. You will pay between $120 and $160 for this replacement job. The labor should cost about $80, while parts will run you about $60.